Gaslands - Tank Tread Upgrades

Help support my work on these models by supporting me on Patreon! I make models for lots of different games every month and supporters will get early access, and input into future models.https://www.patreon.com/sablebadger Gaslands is a tabletop game of post-apocalyptic vehicular mayhem. With fast and cinematic rules, it is designed to be played with toy cars, allowing players to ram, skid and race their way through the wreckage of a burnt-out Earth. These models are built to be upgrades for your gaslands cars to add some ferocios tank tread action! Right now these are very much works in progress, as I work out how to build and upgrade these. I did make one inspired by the Mad Max car called the Peacemaker, but most are inspired by looking at images of tanks and just playing around. I fixed the Peacemaker models to actually lay flat on the print bed. I also updated the snowcat treads to move the wheels deeper into the treads by request. I'm concerned about the printing of this so I left the old model up. Updated to include a slot or square holes in the back of the model to make it easier to make a chassis out of it. I used 2mm which should be good like a thick plastic like cut up CC material. I have quite a few models available for table wargaming, just check below. I put a lot of time into making these models, so if you're inclined a TIP wouldn't hurt. If you'd like to purchase a print of this, you can check here are FunBoardGames on Etsy who is the only authorized vendor of these printed models.https://www.etsy.com/shop/FunBoardGames If the models aren't up on his site just shoot him an email with a request, he is usually pretty quick to respond.